Average Reviews:
(More customer reviews)These rotor blades are made to be breakable, that's just part of the design for the helicopter and understandable.. However, they were shipped with no extra padding around the original box, they just taped paper around the box. When I received them, the box was smashed. It was a small miracle that the rotor blades themselves were not damaged, but I wouldn't order them from here again for fear that they'd be shipped in the same manner and wouldn't make it all the way unbroken.
Click Here to see more reviews about: BladeRunner Search & Rescue (Mini BladeRunner, Bladerunner3 & Extreme Indoor Rescue Helicopter) Replacement Rotor Set
This replacement rotorset fits the BladeRunner Series Extreme Indoor Rescue Helicopter, the Search & Rescue Helicopter, and the Mini BladeRunner made by Interactive Toy Concepts. It is a good idea to keep a spare set of rotors on hand as a backup so you can keep flying, even after a bad crash. ** Technical Information for 1 Rotor Set (2 rotors) * 1 Upper and 1 Lower rotor * Diameter: 9.5" (242mm) * Weight: 0.39oz (11.2g) * Material: Plastic and Carbon Fiber * These rotor blades will only fit the BladeRunner Series Extreme Indoor Rescue Helicopter, the Search & Rescue Helicopter, and the Mini BladeRunner RC Helicopters ** Extreme Indoor Rescue Helicopter Blade Replacement Instructions: 1. The rotors are held in place by a short transparent rubber tube at the top of the main drive shaft. Pull gently to remove this tube 2. Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated 3. When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom) 4. Next, slide the plastic spacer shaft over the rotor shaft 5. Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6. Lastly, reattach the rubber tube ** These rotor blades will only fit the Bladerunner3, BladeRunner Series Extreme Indoor Rescue Helicopter, the Search & Rescue Helicopter, and the Mini BladeRunner RC Helicopters. These will NOT fit Bladerunner 1 or 2, the Micro Mosquito, or the Firefly indoor RC helicopter.
No comments:
Post a Comment